Maine Menu

_____________________

Great Water, Inc.
14 Maine St -Box 34
Brunswick, ME 04011
207 729 8500 TEL
517 813 6509 FAX

TempTech is an advanced electronic temperature controller designed to work with any holding plate or evaporator, refrigerator or freezer system that use the popular Danfoss BD35F or BD50F compressors.

The TempTech system consists of two components – the Control Unit, which mounts directly onto the Danfoss compressor electronic module, and a Display Panel.

TempTech Control Unit will improve the performance and reliability of your refrigeration or freezer system with these features:

TempTech features: · Variable speed control of the compressor. · Soft start and stop of the compressor. · Automatically selects the most efficient compressor speed and run time. · Low voltage set–back (explained further on). · Designed for easy installation and simple wiring. · Preprogrammed with optimized settings for holding plates or evaporators. · Accurate solid state temperature sensors. · Provides power directly for a water pump, spill over fan or auxiliary cooling fan.

Display Panel features: · A box temperature display. (°F or °C) · A manual temperature adjustment. · Compressor status and error indicators. Display Panel has three indicator lights: · Green – compressor running /Hi speed flash · Red –Compressor Error codes - · Yellow – indicates unit is in Manual mode. TempTech will directly power: - Water cooling pump - Compressor fan - "Spill Over" fan

TempTech is pre-programmed to give good results without adusting. It works with most refrigerators freezers, evaporators, holding plates and air, water or keel-cooled compressors. Freezing point of Eutectic holding plates are preprogrammed for optimim power mangement and energy savings.

For more details please download the owners manual. TempTech Manual