Frigoboat Air-Cooled "Capri", Danfoss BD50 compressor with electronic unit, quick-disconnect fittings, operates on 12 or 24VDC. Pre-charged.
Air cooling compressors are less expensive and easier to install than water-cooling systems. They use a fan to blow air across the condenser to remove the heat. This air cooled compressor is equipped with a duct ring on the condenser for adding a flexible duct so that the heated air can be vented to a remote area in the vessel.
Keep in mind that air-cooled compressors need ventilation. They are not suitable for installing in an engine room or other hot, enclosed area. Given enough air to "breathe" air-cooled compressors are efficient, and almost maintenance free.
The basic parts of a air system are: compressor, evaporator and thermostat.
For refrigerators up to 20 cubic feet and freezers up to 10 cubic feet (based on minimum of 3" closed cell polyurethane foam insulation in refrigerator, minimum of 4" in freezer).
Manufacturer Part #E52120